[Top] [Prev] [Next] [Contents] [Index]

PPPD Messages

PPPD messages pertain to communications using Point-to-Point Protocol (PPP) or Serial Line Interface Protocol (SLIP). If you are looking for a message that refers to the PPPD module but does not appear here, refer to "Messages Common to All Modules".


BADIOCTL, Port n: internal I/O error - message
Severity:
Error
Explanation:
The X server has detected an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

BADLDISC, Port n: unable to start protocol line discipline

Severity:
Error
Explanation:
The X server has detected an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

BADOPEN, Unable to open serial port n

Severity:
Error
Explanation:
The X server has detected an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

BADREAD, Port n: read error

Severity:
Error
Explanation:
The X server has detected an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

BADSPMGR, Error talking to Serial Port Manager - message

Severity:
Error
Explanation:
The X server has detected an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

CNFGFAIL, Port n: config error - message

Severity:
Error
Explanation:
The X server has detected a configuration error on the specified port as described in the message.
User Action:
Refer to the message for guidance in resolving the problem. If you need additional assistance, please contact NCD Technical Support.

IPCPFAIL, Port n: IPCP config failure - message

Severity:
Error
Explanation:
The X server has encountered difficulties during communications negotiations due to either host or terminal IPCP (Internet Protocol Control Protocol) configuration errors.
User Action:
Verify that both the host and terminal are configured correctly for IPCP communications. If you need additional assistance, refer to your PPP product documentation or contact NCD Technical Support.

LCPFAIL, Port n: LCP config failure - message

Severity:
Error
Explanation:
The X server has encountered difficulties during communications negotiations due to either host or terminal LCP configuration errors.
User Action:
Verify that both the host and terminal are configured correctly for LCP (Link Control Protocol) communications. If you need additional assistance, refer to your PPP product documentation or contact NCD Technical Support.

LOOPBACK, Port n: the line appears to be looped back

Severity:
Warning
Explanation:
The specified port is configured incorrectly for negotiations between the host system and the terminal.
User Action:
Verify that both the host and terminal are configured correctly for PPP communications. If you need additional assistance, refer to your PPP product documentation or contact NCD Technical Support.

NOCTLSOCK, Unable to create IP control socket

Severity:
Error
Explanation:
The X server has encountered an internal error.
User Action:
If you encounter this message, please contact NCD Technical Support.

NOLOCALADDR, Port n: no local IP address

Severity:
Error
Explanation:
The X server does not have an IP address assigned.
User Action:
Assign the X server's IP address in one of two ways:

NOMEM, Not enough memory

Severity:
Error
Explanation:
The X server does not have sufficient memory to perform the requested action.
User Action:
Close any unused local clients to free memory for the desired function.

RESTART, Port n: protocol_layer is being restarted

Severity:
Information
Explanation:
The remote host sent a termination message which closed the connection; the X server is attempting to re-establish communications at the specified communications protocol layer.
User Action:
None

TERMREQ, Port n: protocol_layer terminate-request received

Severity:
Information
Explanation:
The terminal has received a termination message from the remote host.
User Action:
None

UP, Port n: local = nnn.nnn.nnn.nnn, remote = nnn.nnn.nnn.nnn

Severity:
Information
Explanation:
The X server has established communications on the specified port using the specified IP addresses for the terminal and the remote host.
User Action:
None


[Top] [Prev] [Next] [Contents] [Index]

Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights reserved.